C4-LLDPE-Cast Film(Innovene license)
LL0640AA & LL0640KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.
LL0640AA & LL0640KJ have the following advantages:
− High melt flow rate for high output cast extrusion.
− Excellent combination of strengths and stiffness.
− High gloss and clarity.
If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.
Melt temperature range in the cast process are normally 220oC-260oC and in lean blends for blown film are 160oC-215oC.
LL0640AA & LL0640KJ should be stored in the dry condition below the 50oC and avoided from the exposure of direct sunlight.
* LL0640AA & LL0640KJ are suitable for food contact.
LL0640AA & LL0640KJ have been specially designed for the production of high quality cast films, such as display packaging, bubble film and non cling layer for stretch film.:
| C4-LLDPE-Cast Film(Innovene license) | |||
| Typical properties | Test method (DIN) | Unit | Value |
| MFI@190°C, 2.16 kg | D1238 | gr/10min | 4 |
| Density | D2839 | gr/ml | 0.929 |
| Tensile Strength@Yield, MD/TD | D638 | Mpa | 12/12 |
| Elongation@Break, MD/TD | D638 | % | 600/810 |
| Tensile Strength@Break, MD/TD | D638 | Mpa | 33/25 |
| Haze | D1003 | % | 2 |
| Gloss (45°) | D2457 | Rating | 87 |
| Values shown are averages & are not to be considered as product specifications | |||
| * 40 microns, Film Cast at 75 m/min,240°C MD=Machine Direction, TD=Transverse Direction | |||
LL 0640 AA
