HDPE-INJECTION MOULDING(Innovene license)
HD5050UA is an ultra-violet light stabilised high density polyethylene copolymer grade with a narrow molecular weight distribution, specially developed for injection moulding applications where a good resistance to environmental stress cracking is required.
Characteristics:
Good environmental stress cracking resistance.
High impact resistance, especially at low temperatures.
Good weathering resistance.
Large dustbins & pails.:
Pallet boxes.:
Caps & closures.:
Fish crates.:
HD5050UA is suitable for food contact.:
| HD5050UA (Injection Moulding) | |||
| Typical properties | Test method (ASTM) | Unit | Value |
| MFI@190°C, 2.16 kg | D1238 | gr/10min | 4.5 |
| Density | D1505 | gr/cm3 | 0.95 |
| Tensile Strength@Yield | D638 | Mpa | 25 |
| ensile Modulus | D638 | Mpa | — |
| Elongation@Break | D638 | % | 1000 |
| Flexural Modulus | D790 | Mpa | 800 |
| Hardness Shore D | D2240 | — | 64 |
| Charpy Impact Resistance (Notch) | D256 | Kj/m2 | 15 |
| Values shown are averages & are not to be considered as products specifications. | |||
HD 5050 UA Datasheet
